Wooden door installation standards and specifications
To install a wooden door correctly, the five aspects of door cover, casing, door leaf, hardware and appearance must be implemented according to the standard. The door cover and the wall must be close and seamless, and the diagonal error should not exceed 1.5mm; the cover line and the door cover are completely fixed, the interface is flat and smooth, and the two sides of the cover line must be at the same level; the door leaf installation must be free and smooth , It fits closely with the sealing strip, and the switch has no noise; the hardware accessories are complete, the installation is firm and error-free; the whole door has no protrusions and depressions, and the appearance has no scratches.
Wooden door installation standards and specifications
1. Door cover
The first step in the installation of a wooden door is to install the door cover. When installing, it should be noted that the door cover and the wall must be tightly fitted and flat, and no gaps appear. The error of the two diagonal lines should be less than 1.5mm, which also means that the door cover in the horizontal direction should be parallel to the ground, and the vertical direction should be absolutely vertical. The door cover and the wall need to be fixed with screws, and the gap needs to be filled with styrofoam.
2. Sleeve
There are two points to pay attention to when installing the sleeve. First, the sleeve line and the door cover should be completely fixed, and the gap should be filled with sealant. Second, the sleeve line on both sides should be kept completely horizontal to avoid gap errors after the door leaf is installed.
3. Door leaf
The door leaf is the most critical body of the wooden door. When installing, pay attention to keeping it straight with the door cover. After installation, it is necessary to ensure that the door opens and closes without noise, closes tightly, and the edge of the door leaf and the sealing strip are completely fitted.
4. Hardware
Hardware includes door hinges, locks, door suctions, etc. When installing, pay attention to the precise slotting position. After installation, ensure that there are no errors or gaps that should not exist. At the same time, the hardware installation needs to be firm and stable, and the switch can be used with ease and the effect is good.
5. Appearance
After the wooden door is installed as a whole, it is necessary to ensure the integrity of the appearance, no scratches, no defects, no protrusions and no paint peeling.