1. Purchase by looking at paint

1). Look and touch the fullness of the paint film. This will take a few more comparisons to see. The paint film is plump, indicating that the paint quality is good, the cohesion is strong, and the wood is well sealed. At the same time, it indicates that the painting process is relatively complete, and there is no suspicion of cutting corners.

2). Stand on the oblique side of the door to find the reflective angle of the facade, check whether the paint film on the surface is smooth, whether the orange peel phenomenon is obvious, and whether there are small protruding particles. If the orange peel phenomenon is more obvious, it means that the paint film baking process is not enough.

3). For fancy doors, it depends on the edges of the lines that produce the shapes, especially the inner corners (that is, the corners that can be seen but cannot be touched) whether there is any cracking of the paint film.

4). If you ask about the type of paint, the basic answer is PU paint (polyurethane paint). Please note that the advantage of PU paint is that it is easy to polish.The processing process saves time and effort. The disadvantage is that the paint film is soft, and slight bumps are easy to produce white shadow dents.This possibility is greatly reduced if at least one of the paint layers is PE paint.The advantages of PE paint (polyester paint) are that the paint film is hard, the covering power is strong, the transparency is good, and the veneer texture can be better represented. The disadvantage is that it is difficult to polish, and the processing process is time-consuming and laborious.

2. Purchase according to the flatness

1). The veneer is bubbling, indicating that the veneer is unevenly heated during the attachment process, or the glue is unevenly applied. The flat hot press can solve the problem of uneven heating when the flat door is pasted.

2). The flatness of the surface of the wpc door is not enough, which means that the selection of the board is relatively cheap, and the flatness of the board is not enough. It is conceivable that the environmental protection performance is also difficult to meet the standard, which means that a leaf knows the autumn.

3. Look at the craftsmanship

To see whether the process seams are uniform and small, it is almost the same as choosing a car, which directly reflects the comprehensive process level of the enterprise.

4.look at the installation quality

Although the finished set door is produced in the factory, it is not a finished product until it becomes a commodity and is handed over to the customer. A good installation process, good installation tools, and experienced installation technicians are the keys to the success or failure of installation.

5.look at the hardware

Hardware is a thing that makes it easy for wooden door manufacturers to argue with customers in judging the quality of door products. It is recommended that customers try not to buy hardware components by themselves. If the manufacturer can't provide satisfactory hardware products, you must choose the hardware from famous brand manufacturers, such products are generally guaranteed for life.